[−][src]Crate tokio

A runtime for writing reliable, asynchronous, and slim applications.

Tokio is an event-driven, non-blocking I/O platform for writing asynchronous applications with the Rust programming language. At a high level, it provides a few major components:

Tools for working with asynchronous tasks, including synchronization primitives and channels and timeouts, delays, and intervals.
APIs for performing asynchronous I/O, including TCP and UDP sockets, filesystem operations, and process and signal management.
A runtime for executing asynchronous code, including a task scheduler, an I/O driver backed by the operating system's event queue (epoll, kqueue, IOCP, etc...), and a high performance timer.

Guide level documentation is found on the website.

A Tour of Tokio

Tokio consists of a number of modules that provide a range of functionality essential for implementing asynchronous applications in Rust. In this section, we will take a brief tour of Tokio, summarizing the major APIs and their uses.

The easiest way to get started is to enable all features. Do this by enabling the full feature flag:

tokio = { version = "0.2", features = ["full"] }

Feature flags

Tokio uses a set of feature flags to reduce the amount of compiled code. It is possible to just enable certain features over others. By default, Tokio does not enable any features but allows one to enable a subset for their use case. Below is a list of the available feature flags. You may also notice above each function, struct and trait there is listed one or more feature flags that are required for that item to be used. If you are new to Tokio it is recommended that you use the full feature flag which will enable all public APIs. Beware though that this will pull in many extra dependencies that you may not need.

full: Enables all Tokio public API features listed below.
rt-core: Enables tokio::spawn and the basic (single-threaded) scheduler.
rt-threaded: Enables the heavier, multi-threaded, work-stealing scheduler.
rt-util: Enables non-scheduler utilities.
io-driver: Enables the mio based IO driver.
io-util: Enables the IO based Ext traits.
io-std: Enable Stdout, Stdin and Stderr types.
net: Enables tokio::net types such as TcpStream, UnixStream and UdpSocket.
tcp: Enables all tokio::net::tcp types.
udp: Enables all tokio::net::udp types.
uds: Enables all tokio::net::unix types.
time: Enables tokio::time types and allows the schedulers to enable the built in timer.
process: Enables tokio::process types.
macros: Enables #[tokio::main] and #[tokio::test] macros.
sync: Enables all tokio::sync types.
stream: Enables optional Stream implementations for types within Tokio.
signal: Enables all tokio::signal types.
fs: Enables tokio::fs types.
dns: Enables async tokio::net::ToSocketAddrs.
test-util: Enables testing based infrastructure for the Tokio runtime.
blocking: Enables block_in_place and spawn_blocking.

Note: AsyncRead and AsyncWrite traits do not require any features and are always available.

Internal features

These features do not expose any new API, but influence internal implementation aspects of Tokio, and can pull in additional dependencies. They are not included in full:

parking_lot: As a potential optimization, use the parking_lot crate's synchronization primitives internally. MSRV may increase according to the parking_lot release in use.

Authoring applications

Tokio is great for writing applications and most users in this case shouldn't worry too much about what features they should pick. If you're unsure, we suggest going with full to ensure that you don't run into any road blocks while you're building your application.

Example

This example shows the quickest way to get started with Tokio.

tokio = { version = "0.2", features = ["full"] }

Authoring libraries

As a library author your goal should be to provide the lighest weight crate that is based on Tokio. To achieve this you should ensure that you only enable the features you need. This allows users to pick up your crate without having to enable unnecessary features.

Example

This example shows how you may want to import features for a library that just needs to tokio::spawn and use a TcpStream.

tokio = { version = "0.2", features = ["rt-core", "tcp"] }

Working With Tasks

Asynchronous programs in Rust are based around lightweight, non-blocking units of execution called tasks. The tokio::task module provides important tools for working with tasks:

The spawn function and JoinHandle type, for scheduling a new task on the Tokio runtime and awaiting the output of a spawned task, respectively,
Functions for running blocking operations in an asynchronous task context.

The tokio::task module is present only when the "rt-core" feature flag is enabled.

The tokio::sync module contains synchronization primitives to use when needing to communicate or share data. These include:

channels (oneshot, mpsc, and watch), for sending values between tasks,
a non-blocking Mutex, for controlling access to a shared, mutable value,
an asynchronous Barrier type, for multiple tasks to synchronize before beginning a computation.

The tokio::sync module is present only when the "sync" feature flag is enabled.

The tokio::time module provides utilities for tracking time and scheduling work. This includes functions for setting timeouts for tasks, delaying work to run in the future, or repeating an operation at an interval.

In order to use tokio::time, the "time" feature flag must be enabled.

Finally, Tokio provides a runtime for executing asynchronous tasks. Most applications can use the #[tokio::main] macro to run their code on the Tokio runtime. In use-cases where manual control over the runtime is required, the tokio::runtime module provides APIs for configuring and managing runtimes.

Using the runtime requires the "rt-core" or "rt-threaded" feature flags, to enable the basic single-threaded scheduler and the thread-pool scheduler, respectively. See the runtime module documentation for details. In addition, the "macros" feature flag enables the #[tokio::main] and #[tokio::test] attributes.

CPU-bound tasks and blocking code

Tokio is able to concurrently run many tasks on a few threads by repeatedly swapping the currently running task on each thread. However, this kind of swapping can only happen at .await points, so code that spends a long time without reaching an .await will prevent other tasks from running. To combat this, Tokio provides two kinds of threads: Core threads and blocking threads. The core threads are where all asynchronous code runs, and Tokio will by default spawn one for each CPU core. The blocking threads are spawned on demand, and can be used to run blocking code that would otherwise block other tasks from running. Since it is not possible for Tokio to swap out blocking tasks, like it can do with asynchronous code, the upper limit on the number of blocking threads is very large. These limits can be configured on the Builder.

To spawn a blocking task, you should use the spawn_blocking function.

#[tokio::main]
async fn main() {
    // This is running on a core thread.

    let blocking_task = tokio::task::spawn_blocking(|| {
        // This is running on a blocking thread.
        // Blocking here is ok.
    });

    // We can wait for the blocking task like this:
    // If the blocking task panics, the unwrap below will propagate the
    // panic.
    blocking_task.await.unwrap();
}

If your code is CPU-bound and you wish to limit the number of threads used to run it, you should run it on another thread pool such as rayon. You can use an oneshot channel to send the result back to Tokio when the rayon task finishes.

Asynchronous IO

As well as scheduling and running tasks, Tokio provides everything you need to perform input and output asynchronously.

The tokio::io module provides Tokio's asynchronous core I/O primitives, the AsyncRead, AsyncWrite, and AsyncBufRead traits. In addition, when the "io-util" feature flag is enabled, it also provides combinators and functions for working with these traits, forming as an asynchronous counterpart to std::io. When the "io-driver" feature flag is enabled, it also provides utilities for library authors implementing I/O resources.

Tokio also includes APIs for performing various kinds of I/O and interacting with the operating system asynchronously. These include:

tokio::net, which contains non-blocking versions of TCP, UDP, and Unix Domain Sockets (enabled by the "net" feature flag),
tokio::fs, similar to std::fs but for performing filesystem I/O asynchronously (enabled by the "fs" feature flag),
tokio::signal, for asynchronously handling Unix and Windows OS signals (enabled by the "signal" feature flag),
tokio::process, for spawning and managing child processes (enabled by the "process" feature flag).

Examples

A simple TCP echo server:

use tokio::net::TcpListener;
use tokio::prelude::*;

#[tokio::main]
async fn main() -> Result<(), Box<dyn std::error::Error>> {
    let mut listener = TcpListener::bind("127.0.0.1:8080").await?;

    loop {
        let (mut socket, _) = listener.accept().await?;

        tokio::spawn(async move {
            let mut buf = [0; 1024];

            // In a loop, read data from the socket and write the data back.
            loop {
                let n = match socket.read(&mut buf).await {
                    // socket closed
                    Ok(n) if n == 0 => return,
                    Ok(n) => n,
                    Err(e) => {
                        eprintln!("failed to read from socket; err = {:?}", e);
                        return;
                    }
                };

                // Write the data back
                if let Err(e) = socket.write_all(&buf[0..n]).await {
                    eprintln!("failed to write to socket; err = {:?}", e);
                    return;
                }
            }
        });
    }
}

Modules

fs	`fs` Asynchronous file and standard stream adaptation.
io	Traits, helpers, and type definitions for asynchronous I/O functionality.
net	TCP/UDP/Unix bindings for `tokio`.
prelude	A "prelude" for users of the `tokio` crate.
process	`process` An implementation of asynchronous process management for Tokio.
runtime	The Tokio runtime.
signal	`signal` Asynchronous signal handling for Tokio
stream	`stream` Stream utilities for Tokio.
sync	`sync` Synchronization primitives for use in asynchronous contexts.
task	Asynchronous green-threads.
time	`time` Utilities for tracking time.

Macros

join	`macros` Wait on multiple concurrent branches, returning when all branches complete.
pin	Pins a value on the stack.
select	`macros` Wait on multiple concurrent branches, returning when the first branch completes, cancelling the remaining branches.
task_local	`rt-util` and `rt-core` Declares a new task-local key of type `tokio::task::LocalKey`.
try_join	`macros` Wait on multiple concurrent branches, returning when all branches complete with `Ok(_)` or on the first `Err(_)`.

Functions

spawn

rt-core

Spawns a new asynchronous task, returning a JoinHandle for it.

Attribute Macros

main	`rt-threaded` and `macros` Marks async function to be executed by selected runtime. This macro helps set up a `Runtime` without requiring the user to use Runtime or Builder directly.
test	`rt-threaded` and `macros` Marks async function to be executed by runtime, suitable to test environment